SloanStone EW-62000

Integrated Head containing pre-plumbed water paths and electronic components preassembled on a single mounting plate for rapid, easy installation/maintenance

Sloan Electronic Sensors for hands free point of use activation

Optional top filled gravity fed manual Soap Dispensers

Basin and Integrated Head constructed of durable SloanStone solid surface material

ADA and TAS lavatory Rim Height Standards achieved in a single design

Aesthetically pleasing soft contoured one-piece continuous Basin

Handle Packing, Main Seat, Stop Seat and Vacuum Breaker Molded from PERMEX® Rubber Compound for Chloramine resistance

User-friendly, three-second flush delay and Courtesy Flush® override button

“Low Battery” Flashing LED

Sweat solder adapter with cover tube and cast wall flange with set screw

Solar Powered- The sensor assembly is powered by a solar cell that will harvest power from the artificial indoor light (incandescent, fluorescent or LED), and use it as the energy source. The solar cell can provide approximately 100% power with 650 illuminance (lux).

Four (4) Size AA Battery Back-up Power Source

Synthetic rubber seals for chloramine resistance

Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and low target detection

Fixed metering bypass and no external volume adjustment to ensure water conservation

Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation

Engineered Metal Cover with replaceable Lens Window

ADA Compliant Sloan Solis® Solar Powered Infrared Sensor for automatic “No Hands” operation

3/4” IPS screwdriver Bak-Chek® angle stop with vandal resistant stop cap

User-friendly, three-second flush delay and Courtesy Flush® override button

High Copper, low zinc brass castings for dezincification resistance

Valve body, Cover, Tailpiece and Control Stop shall be in compliance with ASTM Alloy Classification for Semi-Red Brass

Valve shall be in compliance to the applicable sections of ASSE 1037

Designed to maximize and complement Sloan flushometers

Universal high-efficiency model works with 0.125, 0.25 and 0.5 gpf Sloan flushometers

Thorough washdown flushing action

Durable, hygienic vitreous china construction

Vandal resistant stainless steel strainer included

IAPMO certified to meet or exceed ASME A112.19.2 standards

Water Sense listed by EPA that qualifies for most rebate programs

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly

8 second dry time

95% cost savings vs. paper towels

Air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).

Automatically operates by means of an Infrared Optical Sensor with 35-second lockout feature, it activates a strong controlled air blast

Can be easily positioned to comply with ADA requirements or for juvenile height

Can install multiple units on one circuit

Electric Specifications: 110-120V – 11.3-12.2 Amps, 1240-1450 Watts, 50/60 Hz

Externally visible Red LED light that flashes error codes to assist in troubleshooting and identify if filter has been clogged

One-piece heavy-duty rib reinforced die cast zinc alloy housing minimizes damage to dryer in abusive environments

Quantity Recommendations: 1 dryer for every 2 sink stations is sufficient for most applications. For high traffic applications we suggest 1 dryer per sink station.

Residual moisture is evaporated with a warm stream of air up to 135°F/57°C

Suggested Mounting Heights for Ideal Performance (from floor to bottom of dryer): Men: 45” (114 cm), Women: 43” (109 cm), Teenagers: 41” (104 cm), Children: 35” (89 cm), ADA: 37” (94 cm). Note: When mounting for any user ensure that it is mounted below the 48” ADA Maximum

Vandal resistant cover design

Virtually maintenance free

Weight: 15-17 lbs.