Halsted Street Room

Commercial Grade Faucet

ADA Compliant

Cast Brass Spout

Quick Connect Fittings

Integrated Water Shut-off

Wireless Settings Adjustment

On-demand or Metered activation

Hygienic Line Flush

Water Usage and Battery Strength Reporting

Self-adapting Sensor

Touch-free operation improves hand washing hygiene

Modular one-piece construction easily attaches to deck surface

All electronics in spout are sealed

Designed for drip free foam dispensing operation

Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Motor assembly rotates 360 degrees for easy installation

Battery life of 45,000 activations. 1-2 years based on usage.

Approx. 1,500 dispenses per foam soap bottle

Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Ships with battery pack (4 "D" Alkaline batteries included)

Faucet: Commercial Grade and ADA Compliant

Faucet: Cast Brass Spout

Faucet: Quick Connect Fittings

Faucet: Integral water supply shut off

Faucet: Wireless Settings Adjustment

Faucet: On-demand or Metered activation

Faucet: Hygienic Line Flush

Faucet: Water Usage and Battery Strength Reporting

Faucet: Self-adapting Sensor

Soap Dispenser: Touch-free operation improves hand washing hygiene

Soap Dispenser: Modular one-piece construction easily attaches to deck surface

Soap Dispenser: All electronics in spout are sealed

Soap Dispenser: Designed for drip free foam dispensing operation

Soap Dispenser: Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Soap Dispenser: Motor assembly rotates 360 degrees for easy installation

Soap Dispenser: Battery life of 45,000 activations. 1-2 years based on usage.

Soap Dispenser: Approx. 1,500 dispenses per foam soap bottle

Soap Dispenser: Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Soap Dispenser: Can be ordered as individual soap dispenser (ESD-800)

Soap Dispenser: Hardwired or battery powered

ADA-compliant flushometer automatically operates by means of a infrared sensor with multiple-focused, lobular sensing fields for high and low target detection

Fixed metering bypass and no external volume adjustment to ensure water conservation

Adjustable tailpiece to accommodate different height requirements

High copper, low zinc brass castings for dezincification resistance

Available in 0.5 gpf/1.9 Lpf, low consumption (1.0 gpf/3.8 Lpf), water saver (1.5 gpf/5.7 Lpf), and conventional (3.5 gpf/13.2 Lpf) models

Valve body, Cover, Tailpiece and Control Stop shall be in compliance with ASTM Alloy Classification for Semi-Red Brass

Valve shall be in compliance to the applicable sections of ASSE 1037

Designed to maximize and complement Sloan flushometers

Small size and clean lines fits a large variety of applications and restroom looks

Thorough washdown flushing action

Vandal resistant stainless steel strainer included

IAPMO certified to meet or exceed ASME A112.19.2 standards

Water Sense listed by EPA that qualifies for most rebate programs

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly

8 second dry time

95% cost savings vs. paper towels

Air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).

Automatically operates by means of an Infrared Optical Sensor with 35-second lockout feature, it activates a strong controlled air blast

Can be easily positioned to comply with ADA requirements or for juvenile height

Can install multiple units on one circuit

Electric Specifications: 110-120V – 11.3-12.2 Amps, 1240-1450 Watts, 50/60 Hz

Externally visible Red LED light that flashes error codes to assist in troubleshooting and identify if filter has been clogged

One-piece heavy-duty rib reinforced die cast zinc alloy housing minimizes damage to dryer in abusive environments

Quantity Recommendations: 1 dryer for every 2 sink stations is sufficient for most applications. For high traffic applications we suggest 1 dryer per sink station.

Residual moisture is evaporated with a warm stream of air up to 135°F/57°C

Suggested Mounting Heights for Ideal Performance (from floor to bottom of dryer): Men: 45” (114 cm), Women: 43” (109 cm), Teenagers: 41” (104 cm), Children: 35” (89 cm), ADA: 37” (94 cm). Note: When mounting for any user ensure that it is mounted below the 48” ADA Maximum

Vandal resistant cover design

Virtually maintenance free

Weight: 15-17 lbs.