Faucet: 12/24 Hour Hygienic Rinse Line Purge Function

Faucet: Field Settable

Faucet: Unitary Spout Housing Assembly for Easy Cleaning

Faucet: Modular One-piece Construction with all Concealed Components above deck

Faucet: Double Infrared Sensors with Automatic Setting Feature and Microprocessor

Faucet: Low Battery Indicator

Faucet: Bi-stable Magnetic Solenoid Valve

Faucet: Water Supply Connection with Flexible High-pressure Hose and Strainer

Faucet: 8 volt Lithium CR P2 Commercial Battery included

Faucet: Appropriate Mounting Hardware included

Soap Dispenser: Touch-free operation improves hand washing hygiene

Soap Dispenser: Modular one-piece construction easily attaches to deck surface

Soap Dispenser: All electronics in spout are sealed

Soap Dispenser: Designed for drip free foam dispensing operation

Soap Dispenser: Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Soap Dispenser: Motor assembly rotates 360 degrees for easy installation

Soap Dispenser: Battery life of 45,000 activations. 1-2 years based on usage.

Soap Dispenser: Approx. 1,500 dispenses per foam soap bottle

Soap Dispenser: Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Soap Dispenser: Can be ordered as individual soap dispenser (ESD-700)

Faucet: One tool service

Faucet: All wetted components to be stainless steel, engineered thermoplastic, EPDM, and copper or copper alloy

Faucet: Solenoid housed in removable carrier that includes supply strainer

Faucet: Integral water supply shut off

Faucet: Supply strainer serviceable from above deck

Faucet: Vandal resistant spray insert, key housed inside faucet body

Faucet: All electronics sealed to IP-67

Faucet: Gold plated electrical contacts

Faucet: Above deck individual diagnostic indicators for battery life, solenoid condition, and power-up mode

Faucet: Flexible, high pressure supply hoses, 3/8” compression connections

Soap Dispenser: Touch-free operation improves hand washing hygiene

Soap Dispenser: Modular one-piece construction easily attaches to deck surface

Soap Dispenser: All electronics in spout are sealed

Soap Dispenser: Designed for drip free foam dispensing operation

Soap Dispenser: Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Soap Dispenser: Motor assembly rotates 360 degrees for easy installation

Soap Dispenser: Battery life of 45,000 activations. 1-2 years based on usage.

Soap Dispenser: Approx. 1,500 dispenses per foam soap bottle

Soap Dispenser: Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Soap Dispenser: Can be ordered as individual soap dispenser (ESD-500)

Faucet: Double Infrared Sensors with Automatic Setting

Faucet: Automatic Self-adapting Sensor Technology

Faucet: Solar Powered

Faucet: Magnetic Solenoid Valve

Faucet: Water Supply Connection with Flexible High-pressure Hose and Strainer

Faucet: Appropriate Mounting Hardware included

Faucet: Includes 6 VDC Lithium Battery Back-up Power Source

Faucet: 3 year limited warranty

Soap Dispenser: Touch-free operation improves hand washing hygiene

Soap Dispenser: Modular one-piece construction easily attaches to deck surface

Soap Dispenser: All electronics in spout are sealed

Soap Dispenser: Designed for drip free foam dispensing operation

Soap Dispenser: Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Soap Dispenser: Motor assembly rotates 360 degrees for easy installation

Soap Dispenser: Battery life of 45,000 activations. 1-2 years based on usage.

Soap Dispenser: Approx. 1,500 dispenses per foam soap bottle

Soap Dispenser: Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Soap Dispenser: Can be ordered as individual soap dispenser (ESD-2000)

Soap Dispenser: Hardwired or battery powered

Soap Dispenser: Easy to install and maintain with 1500ml or 2300ml refill sizes

Faucet: Double Infrared Sensors with Automatic Setting

Faucet: Automatic Self-adapting Sensor Technology

Faucet: Low Battery Indicator

Faucet: Magnetic Solenoid Valve

Faucet: Water Supply Connection with Flexible High-pressure Hose and Strainer

Faucet: 6 Volt Lithium 2CR5 Commercial Battery included

Faucet: Appropriate Mounting Hardware included

Faucet: Optional 24 Hour Sentinel Activation

Faucet: 3 year limited warranty

Soap Dispenser: Touch-free operation improves hand washing hygiene

Soap Dispenser: Modular one-piece construction easily attaches to deck surface

Soap Dispenser: All electronics in spout are sealed

Soap Dispenser: Designed for drip free foam dispensing operation

Soap Dispenser: Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Soap Dispenser: Motor assembly rotates 360 degrees for easy installation

Soap Dispenser: Battery life of 45,000 activations. 1-2 years based on usage.

Soap Dispenser: Approx. 1,500 dispenses per foam soap bottle

Soap Dispenser: Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Soap Dispenser: Can be ordered as individual soap dispenser (ESD-1500)

Soap Dispenser: Hardwired or battery powered

Fixed volume piston with filtered O-ring bypass

Front access wall plate requires no rear access plumbing chase

Sensor activated, hands-free operation

Battery operated with hardwired option

Electronic override button

Low battery indicator light

Vandal resistant wall plate

Adjustable flush connection

8 1⁄2”(W) x 9 1⁄4”(H) Wall Box Panel Dimension

Designed to maximize and complement Sloan flushometers

Universal model works with Sloan flushometers from 1.1 to 1.6 gpf

Durable, hygienic vitreous china construction with elongated rim

Syphonjet flushing achieves 1000g Map Scores when used with Sloan flushometers

IAPMO certified to meet or exceed ASME A112.19.2 standards

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly

Fixed volume piston with filtered O-ring bypass

Front access wall plate requires no rear access plumbing chase

Sensor activated, hands-free operation

Battery operated with hardwired option

Electronic override button

low Battery indicator light

vandal resistant wall plate

Adjustable flush connection

White Vitreous China

Washdown flushing action

Integral flushing rim

¾" I.P.S. rear spud inlet

2" NPT outlet flange

Fully concealed trapway

Vandal resistant strainer assembly included

All mounting hardware included

100% factory flush tested

Commercial Grade Faucet

ADA Compliant

Cast Brass Spout

Quick Connect Fittings

Integrated Water Shut-off

Wireless Settings Adjustment

On-demand or Metered activation

Hygienic Line Flush

Water Usage and Battery Strength Reporting

Self-adapting Sensor

Touch-free operation improves hand washing hygiene

Modular one-piece construction easily attaches to deck surface

All electronics in spout are sealed

Designed for drip free foam dispensing operation

Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Motor assembly rotates 360 degrees for easy installation

Battery life of 45,000 activations. 1-2 years based on usage.

Approx. 1,500 dispenses per foam soap bottle

Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Ships with battery pack (4 "D" Alkaline batteries included)

8 second dry time

95% cost savings vs. paper towels

Air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).

Automatically operates by means of an Infrared Optical Sensor with 35-second lockout feature, it activates a strong controlled air blast

Can be easily positioned to comply with ADA requirements or for juvenile height

Can install multiple units on one circuit

Electric Specifications: 110-120V – 11.3-12.2 Amps, 1240-1450 Watts, 50/60 Hz

Externally visible Red LED light that flashes error codes to assist in troubleshooting and identify if filter has been clogged

One-piece heavy-duty rib reinforced die cast zinc alloy housing minimizes damage to dryer in abusive environments

Quantity Recommendations: 1 dryer for every 2 sink stations is sufficient for most applications. For high traffic applications we suggest 1 dryer per sink station.

Residual moisture is evaporated with a warm stream of air up to 135°F/57°C

Suggested Mounting Heights for Ideal Performance (from floor to bottom of dryer): Men: 45” (114 cm), Women: 43” (109 cm), Teenagers: 41” (104 cm), Children: 35” (89 cm), ADA: 37” (94 cm). Note: When mounting for any user ensure that it is mounted below the 48” ADA Maximum

Vandal resistant cover design

Virtually maintenance free

Weight: 15-17 lbs.

Commercial Grade Faucet

ADA Compliant

Cast Brass Spout

Quick Connect Fittings

Integrated Water Shut-off

Wireless Settings Adjustment

On-demand or Metered activation

Hygienic Line Flush

Water Usage and Battery Strength Reporting

Self-adapting Sensor

White, vitreous china wall hung lavatory with backsplash

Great complement to all of Sloan's sensor faucet series

Front overflow provides clean appearance

Self-draining deck area with back and side splash shields

All mounting hardware included

IAPMO certified to meet or exceed ASME A112.19.2 standards

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly

Handle Packing, Main Seat, Stop Seat and Vacuum Breaker Molded from PERMEX® Rubber Compound for Chloramine resistance

User-friendly, three-second flush delay and Courtesy Flush® override button

“Low Battery” Flashing LED

Sweat solder adapter with cover tube and cast wall flange with set screw

Solar Powered- The sensor assembly is powered by a solar cell that will harvest power from the artificial indoor light (incandescent, fluorescent or LED), and use it as the energy source. The solar cell can provide approximately 100% power with 650 illuminance (lux).

Four (4) Size AA Battery Back-up Power Source

Synthetic rubber seals for chloramine resistance

Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and low target detection

Fixed metering bypass and no external volume adjustment to ensure water conservation

Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation

Engineered Metal Cover with replaceable Lens Window

ADA Compliant Sloan Solis® Solar Powered Infrared Sensor for automatic “No Hands” operation

3/4” IPS screwdriver Bak-Chek® angle stop with vandal resistant stop cap

User-friendly, three-second flush delay and Courtesy Flush® override button

High Copper, low zinc brass castings for dezincification resistance

Valve body, Cover, Tailpiece and Control Stop shall be in compliance with ASTM Alloy Classification for Semi-Red Brass

Valve shall be in compliance to the applicable sections of ASSE 1037

Designed to maximize and complement Sloan flushometers

Universal high-efficiency model works with 0.125, 0.25 and 0.5 gpf Sloan flushometers

Thorough washdown flushing action

Durable, hygienic vitreous china construction

Vandal resistant stainless steel strainer included

IAPMO certified to meet or exceed ASME A112.19.2 standards

Water Sense listed by EPA that qualifies for most rebate programs

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly

Water conservation is aided by the ADA-compliant, non-hold-open handle, which prevents toilet from exceeding intended flush volume

Flush accuracy is controlled by CID™ technology, also enhancing water efficiency

Integrity of the product is maintained with the vandal-resistant stop cap

Durability is facilitated with high copper, low zinc brass castings for dezincification resistance

Adjustable tailpiece

PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass

Valve body, Cover, Tailpiece and Control Stop shall be in compliance with ASTM Alloy Classification for Semi-Red Brass

Valve shall be in compliance to the applicable sections of ASSE 1037

One tool service

All wetted components to be stainless steel, engineered thermoplastic, EPDM, and copper or copper alloy

Solenoid housed in removable carrier that includes supply strainer

Integral water supply shut off

Supply strainer serviceable from above deck

Vandal resistant spray insert, key housed inside faucet body

All electronics sealed to IP-67

Gold plated electrical contacts

Above deck individual diagnostic indicators for battery life, solenoid condition, and power-up mode

Flexible, high pressure supply hoses, 3/8” compression connections

Bi-stable magnetic solenoid

Four (4) “AA” alkaline batteries

Double infrared sensors with automatic setting feature

Single hole installation

Includes all mounting hardware

Line purge mode, eliminates stagnant water

Adjustable time-outs

3 year limited warranty

Touch-free operation improves hand washing hygiene

Modular one-piece construction easily attaches to deck surface

All electronics in spout are sealed

Designed for drip free foam dispensing operation

Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Motor assembly rotates 360 degrees for easy installation

Battery life of 45,000 activations. 1-2 years based on usage.

Approx. 1,500 dispenses per foam soap bottle

Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Ships with battery pack (4 "D" Alkaline batteries included)

Water conservation is aided by the ADA-compliant, non-hold-open handle, which prevents toilet from exceeding intended flush volume

Flush accuracy is controlled by CID™ technology, also enhancing water efficiency

Integrity of the product is maintained with the vandal-resistant stop cap

Durability is facilitated with high copper, low zinc brass castings for dezincification resistance

Adjustable tailpiece

PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass

Valve body, Cover, Tailpiece and Control Stop shall be in compliance with ASTM Alloy Classification for Semi-Red Brass

Valve shall be in compliance to the applicable sections of ASSE 1037

Designed to maximize and complement Sloan flushometers

Universal model works with Sloan flushometers from 1.1 to 1.6 gpf

Durable, hygienic vitreous china construction with elongated rim

Syphonjet flushing achieves 1000g Map Scores when used with Sloan flushometers

IAPMO certified to meet or exceed ASME A112.19.2 standards

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly