Parent

AC/DC Adapter 100-240 VAC/6 VDC Plug-in (US)

Input: 100-240 VAC/ 50-60 Hz/ 1.8 A

Output: 6.4 VDC / 6000 mA

Included splitter cable to enable powering 2 soap dispensers

Brand Model Compatibility: Optima® ES, ES-S, and PWT flushometers

Electrical box mount transformer for sensor flushometers

Input: 240 VAC, Output: 24 VAC, 50/60 Hz, 50 VA

One EL-154 transformer will power up to ten (10) OPTIMA “ES-S” water closet or urinal (any combination) flushometers

Transformers power different combinations of PWT Systems

Recommended for use on multi-combination units of urinals/water closets or lavatories/showers Class II, UL Listed

Box-mount, foot-mount or plug-in models offer installation flexibility

Designed for under-the-lavatory applications where the outlet temperature of hot water must be controlled for safe, economic use

Installs in place of the Tee fitting supplied with the faucet prior to the solenoid valve

Designed to quickly sense and compensate for temperature fluctuations induced by water temperature and pressure changes in the supply line

Rugged construction features solid brass valve body and corrosion resistant internal components

Water temperature adjustment stem with lock nut to prevent tampering

Equipped with integral check valves at inlets

3/8” compression connection on inlets and outlet

Meets all the performance standards of ASSE 1070 and CSA B125

Capacity — standard: 4.0 gpm (15.0 Lpm)

At 45 PSI differential (310 kPa), with hot water supply between 140°-180° F (60°-82° C).

Maximum Hot Water Supply Temperature: 180° F (82° C)

Minimum Hot Water Supply Temperature: 5° F (2.8° C) above set point

Maximum Operating Pressure: 125 psig (862kPa)

Minimum flow — standard: 0.25 gpm (1.0 Lpm) to ASSE 1016

Factory set: 105° F (40° C)

Replacement Filter for Hand Dryers with HEPA filters

HEPA Filtration System proven to remove 99.97% of potentially present bacteria at 0.3 microns from the air

Depth 3.125 in x Height 2.125 in x Width 7.75 in

This soap is a uncolored and unscented foam soap. It comes in a 1,500 ml bottle that includes a new black straw that is inserted into the soap dispenser.

This soap is used on the ESD-410, ESD-420, ESD-500, ESD-600, ESD-700, ESD-800, ESD-1500, ESD-2000 and ESD-2100 Sloan Soap Dispensers.

This soap is also used in the combo units associated with each of those dispensers

Each soap dispenser ships with 2 bottles of this 1500 ml soap

Each use is 1 ml, in turn an estimated 1,500 uses per bottle before refill is needed

Additional foam soap can be purchased through Sloan (ESD-325) or GOJO distribution (8565-04-N6300GN)

These bottles cannot be refilled after use. They must be recycled and a new bottle inserted into the dispenser. If they are refilled with a different soap it will void the warranty on the soap dispenser.