Sloan® XLERATOR®

Image Product Line
Sloan® XLERATOR®
By Anonymous (not verified) , 18 October 2025
Product Code
HEPA Filter
Product Type
Date Updated
1760313600
Product Category
Url Slug
hepa-filter
Primary Description
Sloan® XLERATOR® Accessory
Series Description
Hand Dryer HEPA Filter Replacement
Accessory Product Type
Hand Dryer
Accessory Sub Type
Air Filter
Accessory Product Line
By admin , 9 October 2025
Product Code
HEPA Retrofit Kit
Product Type
Date Updated
1760313600
Product Category
Url Slug
hepa-retrofit-kit
Primary Description
Sloan® XLERATOR® Accessory
Product Features
Features List
HEPA Filter for Sloan XLERATOR units purchased without HEPA Filter option
HEPA Filtration System proven to remove 99.97% of potentially present bacteria at 0.3 microns from the air
Depth 6 in x Height 3 in x Width 9.5 in
Downloads
Downloads Product Group
Title
Brochure
Series Description
Hand Dryer HEPA Filter Retrofit Kit
Product Line
Accessory Product Type
Hand Dryer
Accessory Sub Type
Air Filter
Accessory Product Line
By admin , 9 October 2025
Product Code
ADA Recess Kit
Product Type
Date Updated
1760313600
Product Category
Url Slug
ada-recess-kit
Primary Description
Sloan® XLERATOR® Accessory
Product Features
Features List
Recess kit for Sloan Xlerator and Sloan Xlerator® dryers to meet ADA protrusion requirement of 4"
Brushed Stainless finish
16 3/8" Wide x 26" High x 3 3/8" Deep
Downloads
Downloads Product Group
Title
BIM Model
Title
Brochure
Series Description
Premium ADA Recess Kit
Imagenes Adicionales
ADA Recess Kit - Imagen adicional 1
Product Line
Accessory Product Type
Hand Dryer
Accessory Sub Type
Recess Kit
Accessory Product Line
By admin , 9 October 2025
Product Code
Xchanger Combo Kit - ADA
Product Type
Date Updated
1760313600
Product Category
Url Slug
xchanger-combo-kit-ada
Primary Description
Sloan® XLERATOR® Accessory
Product Features
Features List
Allows complete retrofit of paper towel dispenser and waste receptacle with Sloan XLERATOR or Sloan XLERATOReco hand dryer
Meets ADA requirements for height and protrusion
No damage to existing wall surface
Brushed Stainless finish
Wall box is fabricated of 22 GA 18-8 type 304 stainless steel with #4 satin finish with 16 GA 18-8 type 304 stainless steel dryer mounting plate. All welded construction.
16 3/8” wide x 26” high x 3 3/8” deep (416 mm wide x 660 mm high x 86 mm deep)
Downloads
Downloads Product Group
Title
BIM Model
Title
Brochure
Product Line
Accessory Product Type
Hand Dryer
Accessory Sub Type
Recess Kit
Accessory Product Line
By admin , 9 October 2025
Product Code
Pre-Filter
Product Type
Date Updated
1760313600
Product Category
Url Slug
pre-filter
Primary Description
Sloan® XLERATOR® Accessory
Product Features
Features List
Replacement Pre-Filter for Hand Dryers with HEPA filters
HEPA Filtration System proven to remove 99.97% of potentially present bacteria at 0.3 microns from the air
Depth 3.25 in x Height 0.75 in x Width 7.75 in
Downloads
Downloads Product Group
Title
Brochure
Series Description
Hand Dryer Pre-Filter Replacement
Product Line
Accessory Product Type
Hand Dryer
Accessory Sub Type
Air Filter
Accessory Product Line
By admin , 9 October 2025
Product Code
EHD-501-ECO
Product Type
Date Updated
1760313600
Product Category
Url Slug
ehd-501-eco
Primary Description
Sloan® XLERATOR® Hand Dryer
Product Features
Features List
35-second lockout feature if hands are not removed
10 second dry time
95% cost savings vs. paper towels
Adjustable speed and sound (High-Low)
Can install multiple units on one circuit
Electric Specifications: 110-120V – 4.3-4.5 Amps, 460-530 Watts, 50/60 Hz
Externally visible Red LED light that flashes error codes to assist in troubleshooting and identify if filter has been clogged
Hygienic hand drying solution
No Heat option
Quantity Recommendations: 1 dryer for every 2 sink stations is sufficient for most applications. For high traffic applications we suggest 1 dryer per sink station.
Suggested Mounting Heights for Ideal Performance (from floor to bottom of dryer): Men: 45” (114 cm), Women: 43” (109 cm), Teenagers: 41” (104 cm), Children: 35” (89 cm), ADA: 37” (94 cm). Note: When mounting for any user ensure that it is mounted below the 48” ADA Maximum
Vandal resistant cover design
Virtually maintenance free
Weight: 15-17 lbs.
Downloads
Downloads Product Group
Title
BIM Model
Title
Brochure
Title
Installation Instructions
Title
Transparency Reports
Series Description
Sloan® XLERATOR® Sensor-Operated Wall-Mounted Hand Dryer
Imagenes Adicionales
EHD-501-ECO - Imagen adicional 1
EHD-501-ECO - Imagen adicional 2
Measure Depth
6.69in
Measure Depth (mm)
170.00mm
Measure Width
11.75in
Measure Width (mm)
298.00mm
Measure Height
12.69in
Measure Height (mm)
322.00mm
Product Line
Hand Dryer Activation
Sensor
Hand Dryer Mounting
Wall-Mounted
Hand Dryer Product Line
By admin , 9 October 2025
Product Code
EHD-501
Product Type
Date Updated
1760313600
Product Category
Url Slug
ehd-501
Primary Description
Sloan® XLERATOR® Hand Dryer
Product Features
Features List
8 second dry time
95% cost savings vs. paper towels
Air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).
Automatically operates by means of an Infrared Optical Sensor with 35-second lockout feature, it activates a strong controlled air blast
Can be easily positioned to comply with ADA requirements or for juvenile height
Can install multiple units on one circuit
Electric Specifications: 110-120V – 11.3-12.2 Amps, 1240-1450 Watts, 50/60 Hz
Externally visible Red LED light that flashes error codes to assist in troubleshooting and identify if filter has been clogged
One-piece heavy-duty rib reinforced die cast zinc alloy housing minimizes damage to dryer in abusive environments
Quantity Recommendations: 1 dryer for every 2 sink stations is sufficient for most applications. For high traffic applications we suggest 1 dryer per sink station.
Residual moisture is evaporated with a warm stream of air up to 135°F/57°C
Suggested Mounting Heights for Ideal Performance (from floor to bottom of dryer): Men: 45” (114 cm), Women: 43” (109 cm), Teenagers: 41” (104 cm), Children: 35” (89 cm), ADA: 37” (94 cm). Note: When mounting for any user ensure that it is mounted below the 48” ADA Maximum
Vandal resistant cover design
Virtually maintenance free
Weight: 15-17 lbs.
Downloads
Downloads Product Group
Title
BIM Model
Title
Brochure
Title
Installation Instructions
Title
Repair & Maintenance Guide
Title
Transparency Reports
Series Description
Sloan® XLERATOR® Sensor-Operated Wall-Mounted Hand Dryer
Imagenes Adicionales
EHD-501 - Imagen adicional 1
EHD-501 - Imagen adicional 2
Measure Depth
6.69in
Measure Depth (mm)
170.00mm
Measure Width
11.75in
Measure Width (mm)
298.00mm
Measure Height
12.69in
Measure Height (mm)
322.00mm
Product Line
Hand Dryer Activation
Sensor
Hand Dryer Mounting
Wall-Mounted
Hand Dryer Product Line
By admin , 8 October 2025
Product Code
3366142
Product Type
Date Updated
1761350400
Product Category
Url Slug
ehd-501-pw-hepa
Measure Depth
13.00in
Measure Depth (mm)
330.20mm
Measure Width
12.00in
Measure Width (mm)
305.00mm
Measure Height
9.50in
Measure Height (mm)
241.00mm
Measure Weight (Kg)
6.00Kg
Measure Weight
13.00Lb
Product Line
Parent
Hand Dryer Product Line
Spec Sheet Description
EHD-501, HEPA, 110/120V