State Street Room

Maximum static load rating of 1,000 lbs when installed on an appropriate wall carrier support system (not recommended for bariatric use)

Universal model works with Sloan flushometers from 1.1 to 1.6 gpf

Durable, hygienic vitreous china construction with elongated rim

Syphon jet flushing achieves 1000g Map Scores when used with Sloan flushometers

IAPMO certified to meet or exceed ASME A112.19.2 standards

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly

Designed to complement Sloan flushometers

State-of-the-art photovoltaic technology delivers solar operation

User friendly three (3) second Flush Delay

“Low Battery” Flashing LED

Sweat solder adapter with cover tube and cast wall flange with set screw

Solar Powered- The sensor assembly is powered by a solar cell that will harvest power from the artificial indoor light (incandescent, fluorescent or LED), and use it as the energy source. The solar cell can provide approximately 100% power with 650 illuminance (lux).

Operates by means of an infrared sensor with multiple-focused, lobular sensing fields for high and low target detection

Four (4) Size AA Battery Back-up Power Source

Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation

Engineered Metal Cover with replaceable Lens Window

Flex Tube Diaphragm designed for improved life and reduced maintenance

PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass

Courtesy Flush® Override Button

Override button enables manual flushing if sensor’s power source fails

Valve shall be in compliance to the applicable sections of ASSE 1037

High copper, low zinc brass castings for dezincification resistance

Valve body, Cover, Tailpiece and Control Stop shall be in compliance with ASTM Alloy Classification for Semi-Red Brass

Double Infrared Sensors with Automatic Setting Feature and Microprocessor

Automatic Self-adapting Sensor Technology

Low Battery Indicator

Magnetic Solenoid Valve

Water Supply Connection with Flexible High-pressure Hose and Strainer

6 volt Lithium CR-P2 Commercial Battery included

Appropriate Mounting Hardware included

3 year limited warranty

Touch-free operation improves hand washing hygiene

Modular one-piece construction easily attaches to deck surface

All electronics in spout are sealed

Designed for drip free foam dispensing operation

Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Motor assembly rotates 360 degrees for easy installation

Battery life of 45,000 activations. 1-2 years based on usage.

Approx. 1,500 dispenses per foam soap bottle

Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Ships with battery pack (4 "D" Alkaline batteries included)

Sensor range – nominal 5”

All mounting hardware included

Optional ESD-324 AC adaptor can be purchased separately (part number 0346090) for hardwired applications and includes splitter cable to enable powering 2 soap dispensers. If using AC adaptor, GFI outlet 120V/15 Amp suggested per code

Additional foam soap can be purchased through Sloan (ESD-325) or GOJO distribution (8565-04-N6300GN)

Select the ESD-2001 to combine ESD-2000 soap dispenser, 2 bottles of soap and the EAF-275-ISM faucet

Note: Must used approved soap refills. Refills cannot be refilled after use. They must be recycled and a new bottle inserted into the dispenser. If they are refilled with a different soap the warranty on the soap dispenser will become null and void.