Accessory

Retrofits to most any existing valve

Lifting Handle UP initiates reduced flush, eliminating liquid and paper waste

Pushing Handle DOWN initiates full flush, eliminating solid waste and paper

Reduces water volume by up to 30% when activated UPWARDS

Antimicrobial Coating on Handle protects against germ transmission

Distinctive Green Handle signifies Water Conserving Device

Handle Packing molded from PERMEX® Rubber Compound for Chloramine Resistance

Includes (2) adhesive backed Metal Wall Plates etched w/Instructions

NOTE: Does not include complete Flushometer valve. For complete valve, use Sloan Flushometer Models WES-111 or WES-115

HEPA Filter for Sloan XLERATOR units purchased without HEPA Filter option

HEPA Filtration System proven to remove 99.97% of potentially present bacteria at 0.3 microns from the air

Depth 6 in x Height 3 in x Width 9.5 in

Recess kit for Sloan Xlerator and Sloan Xlerator® dryers to meet ADA protrusion requirement of 4"

Brushed Stainless finish

16 3/8" Wide x 26" High x 3 3/8" Deep

Designed to fit under Sloan's hand dryers to protect walls from water that is blown off during the drying process

Brushed Nickel finish. Available in 3 finishes/colors

Depth 0.0625 in x Height 15.75 in x Width 31.75

Designed to fit under Sloan's hand dryers to protect walls from water that is blown off during the drying process

Black finish. Available in 3 finishes/colors

Depth 0.0625 in x Height 15.75 in x Width 31.75

Designed to fit under Sloan's hand dryers to protect walls from water that is blown off during the drying process

Polished White finish. Available in 3 finishes/colors

Depth 0.0625 in x Height 15.75 in x Width 31.75

Allows complete retrofit of paper towel dispenser and waste receptacle with Sloan XLERATOR or Sloan XLERATOReco hand dryer

Meets ADA requirements for height and protrusion

No damage to existing wall surface

Brushed Stainless finish

Wall box is fabricated of 22 GA 18-8 type 304 stainless steel with #4 satin finish with 16 GA 18-8 type 304 stainless steel dryer mounting plate. All welded construction.

16 3/8” wide x 26” high x 3 3/8” deep (416 mm wide x 660 mm high x 86 mm deep)

Reduces sound level by 9 decibles (increases dry time by 3 seconds)

Easily retrofitted into any Sloan XLERATOR® or Optima Air® units

Depth 2 in x Height 3.75 in x Width 3.5 in