Special Finishes Brushed Nickel G2

Double Infrared Sensors with Automatic Setting Feature and Microprocessor

Automatic Self-adapting Sensor Technology

Low Battery Indicator

Magnetic Solenoid Valve

Water Supply Connection with Flexible High-pressure Hose and Strainer

6 volt Lithium CR-P2 Commercial Battery included

Appropriate Mounting Hardware included

3 year limited warranty

Touch-free operation improves hand washing hygiene

Modular one-piece construction easily attaches to deck surface

All electronics in spout are sealed

Designed for drip free foam dispensing operation

Motor assembly will be suspended the under sink deck and connected to the soap dispenser spout

Motor assembly rotates 360 degrees for easy installation

Battery life of 45,000 activations. 1-2 years based on usage.

Approx. 1,500 dispenses per foam soap bottle

Ships with 2 bottles of ESD-325 non-scented, non-colored foam soap (1500ml per bottle)

Ships with battery pack (4 "D" Alkaline batteries included)

ADA-compliant flushometer automatically operates by means of a infrared sensor with multiple-focused, lobular sensing fields for high and low target detection

Fixed metering bypass and no external volume adjustment to ensure water conservation

Adjustable tailpiece to accommodate different height requirements

High copper, low zinc brass castings for dezincification resistance

Available in 0.5 gpf/1.9 Lpf, low consumption (1.0 gpf/3.8 Lpf), water saver (1.5 gpf/5.7 Lpf), and conventional (3.5 gpf/13.2 Lpf) models

Valve body, Cover, Tailpiece and Control Stop shall be in compliance with ASTM Alloy Classification for Semi-Red Brass

Valve shall be in compliance to the applicable sections of ASSE 1037

Designed to maximize and complement Sloan flushometers

Small size and fully enclosed trapway provide attractive design

Thorough washdown flushing action

Vandal resistant stainless steel strainer included

IAPMO certified to meet or exceed ASME A112.19.2 standards

Water Sense listed by EPA that qualifies for most rebate programs

Meets ADA guidelines and ANSI A117.1 requirements when installed accordingly

Hygienic hand drying solution

14 second dry time

Electric Specifications: 110-120V – 7-7.7 Amps, 770-915 Watts, 50/60 Hz

Meets ADA requirements without the need of a recess kit

Adjustable speed and sound (High-Low)

Adjustable Heat (High-Low-Off)

95% cost savings vs. paper towels

Weight: 8-10 lbs.

Vandal resistant cover design

Suggested Mounting Heights for Ideal Performance (from floor to bottom of dryer): Men: 45” (114 cm), Women: 43” (109 cm), Teenagers: 41” (104 cm), Children: 35” (89 cm), ADA: 37” (94 cm). Note: When mounting for any user ensure that it is mounted below the 48” ADA Maximum

Can install multiple units on one circuit

35-second lockout feature if hands are not removed

Externally visible Red LED light that flashes error codes to assist in troubleshooting and identify if filter has been clogged

Virtually maintenance free

Air temperature of up to 141°F (61°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).

Quantity Recommendations: 1 dryer for every 2 sink stations is sufficient for most applications. For high traffic applications we suggest 1 dryer per sink station.